. . .

LegUp LandinGear - Generation II
Like Nothing You Have Seen Before!

LegUp™ Gen II Holding up the Bike

Do you sometimes have difficulty managing your bike at slow speeds? Backing up? With a rider? Many do! That is why we came up with LegUp™ LandinGear!

The Patented LegUp™ design was created for those who for whatever reason are concerned about, or unable to hold up these 850 lb monsters as they come to a stop. Older riders, bad knees, bad hips, bad passengers (couldn't resist!), or any other reason someone might want a little help keeping the rubber side down... This will do it!

Our unique retractable stabilization system can help many riders stay on their bikes rather than giving up the sport they love, or resorting to a trike. Using a computer and a pair of pneumatically controlled wheels, LegUp™ deploys these wheels (if desired) as you slow to around six MPH, and automatically retracts them if you accelerate over that speed.

LegUp™ Gen II - On GoldWing Over eight years ago, Chopper Design introduced the original LegUp™ LandinGear system. Since then, thousands of riders have been helped by it's ability to stabilize their bikes at slow speeds. The GENERATION II system we use today is significantly stronger than it's younger brother. An on-board compressor and a captive air tank, makes this system amazing to watch!

The wheels deploy and retract based on wheel speed; with the .25 second deployment time, we are able to bring the wheels down at a very slow speed (5-6 MPH). The onboard computer controls everything, and a Handlebar switch housing with LEDS allows the rider to communicate with the system and allows the system to talk back!

LegUp™ Gen2 Prototype, Deployed The wheels are mounted under the rear floorboards, and tuck up neatly just in front of the bags when not deployed, allowing the bike to be leaned and handle exactly as it always has. You can't do that with a trike or other hokey outrigger systems. The installation Requires no major modifications to the existing bike at all !!

Compressor Tucked Neatly in Saddlebag GENII is in production NOW! It is available for all Harley Touring bikes, Harley Heritage Softails, Harley Dyna Switchbacks, Honda GL1800 and GL1500 Gold Wings, as well as Kawasaki 1700 Voyagers and Yamaha Royalstars. As time goes on, other models will be added to the lineup. For a limited time, ALL models will be shipped for $3,500 (there is a $250 upcharge for Heritage models. Details at Heritage Softail page.), and we have about a 3 week waiting list!

Unfortunately, we no longer produce the GENI system.

If you would like, take a look at our Users Manual, or our whole list of install MANUALS found here.

Please click on the PHOTOS for a larger view, and watch the VIDEO below. So Far the reaction to the new system has been amazing. People cannot believe how strong the supports are and how stable the bike is with them deployed.

Have a look at the video and see if you don't agree!

Please contact us with any questions at 407-834-5007 or Info@landingear.com.

DEALER INQUIRIES INVITED!

Thanks !!!
Small Logo

LegUp™ GenII - Early Production Showing Off The LegUp Gen II Gen II Retracted - GL1500