Skip to the navigation Skip to the top of Page Skip to the content
Skip nav target

Internet Explorer Warning

LegUp LandinGear

Indian Roadmaster 2015 and UP


LegUp™ Gen II Retracted Do you sometimes have difficulty managing your bike at slow speeds? Backing up? With a rider? Many do! That is why we came up with LegUp™ LandinGear!

LegUp™ Gen II - Showing Off! The Patented LegUp™ design was created for those who for whatever reason are concerned about, or unable to hold up these 850 lb monsters as they come to a stop. Older riders, bad knees, bad hips, bad passengers (couldn't resist!), or any other reason someone might want a little help keeping the rubber side down... This will do it!

Our unique retractable stabilization system can help many riders stay on their bikes rather than giving up the sport they love, or resorting to a trike. Using a computer and a pair of pneumatically controlled wheels, LegUp™ deploys these wheels (if desired) as you slow to around six MPH, and automatically retracts them if you accelerate over that speed.

Over ten years ago, Chopper Design introduced the original LegUp™ LandinGear system. Since then, thousands of riders have been helped by it's ability to stabilize their bikes at slow speeds. The GENERATION II system we use today is significantly stronger than it's older brother. An on-board compressor and a captive air tank, makes this system amazing to watch!

The wheels deploy and retract based on wheel speed; with the .25 second deployment time, we are able to bring the wheels down at a very slow speed (5-6 MPH). The onboard computer controls everything, and a Handlebar switch housing with LEDS allows the rider to communicate with the system and allows the system to talk back!

LegUp™ Gen2, Deployed, Indian Compressor Tucked Neatly in Saddlebag The wheels are mounted under the rear floorboards, and tuck up neatly just in front of the bags when not deployed, allowing the bike to be leaned and handle exactly as it always has. You can't do that with a trike or other hokey outrigger systems. The installation Requires no major modifications to the existing bike at all !!

Our GENII system is in full production NOW for the Indian Roadmaster. Take advantage of our introductory price; the GEN II system will be shipped for $3,500, and we are averaging about a 3 week wait!

With some small changes, this system can be adapted to the Indian Chieftain and Vintage offerings; give us a call to discuss if you have one of these models!

If you would like, take a look at our Users Manual, or Indian Roadmaster Install Manual.

PLEASE NOTE: Due to how wide the Indian Floor Board mounts are, lean angle on this bike is less than any other model. If you are an aggressive rider, this may have a negative impact and we suggest that this may not be the product for you! If, on the other hand, you wish to continue riding your bike and you are a conservative rider, this lack of lean angle will have no impact, and we would be happy to make a system for you. Just trying to be as transparent as we can.

Brief Contact Info

Please contact us with any questions at 407-834-5007 or



Thanks !!!
Small Logo