Skip to the navigation Skip to the top of Page Skip to the content
Skip nav target

LegUp LandinGear

Harley Touring Bikes 88-UP


LegUp™ Gen II Prototype on a Harley Do you sometimes have difficulty managing your bike at slow speeds? Backing up? With a rider? Many do! That is why we came up with LegUp™ LandinGear!

LegUp™ Gen II - Showing Off! The Patented LegUp™ design was created for those who for whatever reason are concerned about, or unable to hold up these 850 lb monsters as they come to a stop. Older riders, bad knees, bad hips, bad passengers (couldn't resist!), or any other reason someone might want a little help keeping the rubber side down... This will do it!

Our unique retractable stabilization system can help many riders stay on their bikes rather than giving up the sport they love, or resorting to a trike. Using a computer and a pair of pneumatically controlled wheels, LegUp™ deploys these wheels (if desired) as you slow to around six MPH, and automatically retracts them if you accelerate over that speed.

Over ten years ago, Chopper Design introduced the original LegUp™ LandinGear system. Since then, thousands of riders have been helped by it's ability to stabilize their bikes at slow speeds. The GENERATION II system we use today is significantly stronger than it's older brother. An on-board compressor and a captive air tank, makes this system amazing to watch!

The wheels deploy and retract based on wheel speed; with the .25 second deployment time, we are able to bring the wheels down at a very slow speed (5-6 MPH). The onboard computer controls everything, and a Handlebar switch housing with LEDS allows the rider to communicate with the system and allows the system to talk back!

LegUp™ Gen2, Deployed, Harley The wheels are mounted under the rear floorboards, and tuck up neatly just in front of the bags when not deployed, allowing the bike to be leaned and handle exactly as it always has. You can't do that with a trike or other hokey outrigger systems. The installation Requires no major modifications to the existing bike at all !!

Compressor Tucked Neatly in Saddlebag GEN II is in full production for Harley Touring bikes. The GEN II system will be shipped to you for $3,650, and we are averaging about a 3 week wait!

If you would like, take a look at our Users Manual, or Harley G2 Touring Install Manual.

Please click on the PHOTOS for a larger view, and watch the VIDEO below. So Far the reaction to the new system has been amazing. People cannot believe how strong the supports are and how stable the bike is with them deployed.

PLEASE NOTE: Harley Touring Bikes TYPICALLY have STANDARD Harley Rear Floorboard Mounts. Some bikes (CVO models, Street Glides, Ultra Low, etc.) have either foot pegs or upgraded floorboards. If your bike is like this, you will need a set of floorboards and they will mount to our system perfectly. We can supply these or you can get them from a Harley Dealer or used online. Feel free to contact us with questions about this.

Brief Contact Info

Please contact us with any questions at 407-834-5007 or



Thanks !!!
Small Logo